Single & Double row deep groove ball bearings

They are simple in design, non-separable, suitable for high and even very high speeds and require little maintenance. This bearing type can accommodate axial loads in both directions, in addition to radial loads, even at high speeds. Single row deep groove ball bearings are the most widely used bearing type meaning they are available in a wide variety of finishes and sizes.

With the same outside & bore diameters as single row bearings, double row bearings are slightly wider than single row bearings but have considerably higher load carrying capacity.

Single & Double row angular contact ball bearings

Angular contact ball bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

Single row angular contact ball bearings can accommodate axial loads acting in one direction only. The bearing is normally adjusted against a second bearing.

Double row angular contact ball bearings can accommodate radial loads as well as axial loads acting in both directions. They provide stiff bearing arrangements and are able to accommodate tilting moments.

Self-aligning ball bearings

Self-aligning ball bearings have two rows of balls and a common sphered raceway in the outer ring. The bearing is consequently self-aligning and is particularly suitable for applications where considerable shaft deflections or misalignment are to be expected.